A piston geometry and nozzle spray angle investigation in a DI diesel engine by quantifying the air-fuel mixture

作者：Dimitriou, Pavlos^*; Wang, Weiji; Peng, Zhijun

来源：International Journal of Spray and Combustion Dynamics, 2015, 7(1): 1-24.

DOI：10.1260/1756-8277.7.1.1

• TURBULENCE
• MODEL
• FLOW
• CFD

Low temperature diesel combustion has been widely investigated over the last few years for reducing in-cylinder emissions of Direct Injection (DI) diesel engines without sacrificing efficiency and fuel consumption. The spatial distribution of the fuel within the combustion chamber and the air-fuel mixing quality are the key factors affecting temperature generation within the cylinder. Avoiding fuel rich areas within the cylinder can significantly reduce the local high temperatures resulting in low NOx formation. This paper investigates the effects of the combustion chamber geometry and spray angle on the air-fuel mixing and emissions formation of a DI diesel engine. A new quantitative factor measuring the air-fuel mixing quality has been adopted in order to analyze and compare air-fuel mixing quality for different piston geometries. The results have shown that pistons with a narrow entrance and a deep combustion re-entrant chamber benefit from increased air-fuel mixtures due to the significantly higher swirl generated within the cylinder. However, the improved air-fuel mixing does not consequently lead to a reduced NOx generation, which is highly affected by the combustion efficiency of the engine.

• 出版日期2015-3