A multilayer dual wideband circularly polarized microstrip antenna with DGS for WLAN/Bluetooth/ZigBee/Wi-Max/IMT band applications

作者：Kaur Amanpreet^*; Khanna Rajesh; Kartikeyan Machavaram

来源：International Journal of Microwave and Wireless Technologies, 2017, 9(2): 317-325.

DOI：10.1017/S1759078715001294

• Stacked Aperture coupled MSA
• DGS
• WLAN
• Bluetooth
• ZigBee
• WiMaX
• IMT
• Return loss
• Circular polarization
• Impedance bandwidth
• Radiation pattern

In this paper, a three layered stacked circularly polarized rectangular dual band microstrip antenna with a defected ground structure (DGS) and a feed network with stub (showing dual wideband characteristic) is designed, fabricated, and tested for WLAN, Zig bee, Wi-Max, and IMT band applications. The proposed antenna is fabricated on an FR4 substrate with dielectric constant (epsilon r) of 4.4; tan delta of 0.0024 and a height of 1.57 mm. The antenna has a surface area of 4.8 x 4.1 cm(2) and a total height of 5.1 mm. The designed antenna covers two wireless bands from 2.39 to 2.64GHz and 3.39-3.76 GHZ with impedance bandwidths (VSWR, 2) of 250 MHz (9% bandwidth centered at 2.515 GHz) and 370 MHz (10% bandwidth centered at 3.57 GHz), respectively. This antenna is capable of covering IEEE 802.11b/g/n standards of WLAN from 2.4 to 2.485 GHz, bluetooth applications from 2.4 to 2.483 GHz, ZigBee applications from 2.4 to 2.485 GHz, IEEE 802.16/ Wi-MaX applications from 3.4 to 3.69 GHz and international mobile telecommunications (IMT) band from 3.4 to 3.6 GHz. As the antenna is circularly polarized, the misalignment of the receiver with transmitter does not affect the performance of the system. The antenna designing was done using CST MWS V' 10 and the prototype of the designed antenna was tested for the validation of S-11 (dB) and gain results against the simulated ones experimentally. The proposed antenna shows a gain of 4.08 dBi at 2.5 GHz and a gain of 5.024 dBi at 3.51 GHz.

• 出版日期2017-3