Determination of spatially-resolved porosity, tracer distributions and diffusion coefficients in porous media using MRI measurements and numerical simulations

作者：Marica Florea^*; Jofre Sergio Andres Bea; Mayer K Ulrich; Balcom Bruce J; Al Tom A

来源：Journal of Contaminant Hydrology, 2011, 125(1-4): 47-56.

DOI：10.1016/j.jconhyd.2011.04.008

• Diffusion
• Density-driven advection
• SPRITE MRI
• Transport modeling
• Homogeneous
• Heterogeneous
• Porous media

This work is focused on measuring the concentration distribution of a conservative tracer in a homogeneous synthetic porous material and in heterogeneous natural sandstone using MRI techniques, and on the use of spatially resolved porosity data to define spatially variable diffusion coefficients in heterogeneous media. The measurements are made by employing SPRITE, a fast MRI method that yields quantitative, spatially-resolved tracer concentrations in porous media. Diffusion experiments involving the migration of H(2)O into D(2)O-saturated porous media are conducted. One-dimensional spatial distributions of H(2)O-tracer concentrations acquired from experiments with the homogeneous synthetic calcium silicate are fitted with the one-dimensional analytical solution of Fick's second law to confirm that the experimental method provides results that are consistent with expectations for Fickian diffusion in porous media. The MRI-measured concentration profiles match well with the solution for Fick's second law and provide a pore-water diffusion coefficient of 1.75 x 10(-9) m(2) s(-1). The experimental approach was then extended to evaluate diffusion in a heterogeneous natural sandstone in three dimensions. The relatively high hydraulic conductivity of the sandstone, and the contrast in fluid density between the H(2)O tracer and the D(2)O pore fluid, lead to solute transport by a combination of diffusion and density-driven advection. The MRI measurements of spatially distributed tracer concentration, combined with numerical simulations allow for the identification of the respective influences of advection and diffusion. The experimental data are interpreted with the aid of MIN3P-D - a multicomponent reactive transport code that includes the coupled processes of diffusion and density-driven advection. The model defines local diffusion coefficients as a function of spatially resolved porosity measurements. The De values calculated for the heterogeneous sandstone and used to simulate diffusive and advective transport range from 5.4 x 10(-12) to 1.0 x 10(-10) m(2) s(-1). These methods have broad applicability to studies of contaminant migration in geological materials.

• 出版日期2011-7-1