Hydrophobic nano-silica/polydimethylsiloxane membrane for dimethylcarbonate-methanol separation via pervaporation

作者：Wang Lei; Han Xiaolong; Li Jiding^*; Zhan Xia; Chen Jian

来源：Chemical Engineering Journal, 2011, 171(3): 1035-1044.

DOI：10.1016/j.cej.2011.04.058

• Dimethylcarbonate
• Methanol
• Poly(dimethylsiloxane)
• Nano-silica
• Pervaporation

Pervaporation is a potentially attractive process for the separation of dimethylcarbonate (DMC)/methanol mixture. Here we have studied the cross-linking density, swelling degree and pervaporation performance of the DMC-selective hydrophobic nano-silica/polydimethylsiloxane membrane by varying the membrane preparation parameters including cross-linking agent concentration, nano-silica loading, solvent concentration, operating time and temperature. The structural morphology, thermal stability and mechanical properties of the membrane were also investigated. Our results indicate that the thermal and mechanical stability of membrane can be enhanced by the well distributed silica incorporation, and the membrane containing 15 wt%, hydrophobic nano-silica has the highest separation factor of 3.97 with a permeation flux of 702 g m(-2) h(-1) for 30 wt% DMC at the feed temperature of 40 degrees C. Additionally, the sorption and diffusion selectivity of the membrane were measured and discussed via the solution-diffusion mechanism. The very low calculated diffusion selectivity of the membrane indicates that diffusion is the limiting factor in pervaporation performance.

• 出版日期2011-7-15
• 单位清华大学