科研之友
微信
新浪微博
Facebook
分享链接
摘要
The present study was aimed at exploring the influence of compositions on the deformation behavior of inclusion system CaO-Al2O3-SiO2, during hot rolling processes. The plastic deformations of four inclusions with different compositions, at different rolling temperatures (800, 850, 900, 982 and 1100 A degrees C), were simulated using a finite element model. The equivalent plastic strain distributions and the shapes of the inclusions after rolling were obtained via the model. The influences of rolling temperature, flow stresses of inclusions and matrix, reduction, etc., on the void length and the deformation degree of inclusions were analyzed. The critical temperatures of the four inclusions during hot rolling were different. No voids occurred above the critical temperature. Voids only occurred along the length direction, but not the width and thickness directions, below the critical temperature. Low rolling temperatures led to long void length and small deformation of inclusions. The inclusion with high SiO2 content had a high critical temperature and a high risk of void formation. Results generated by the experiment on deformation behaviors of inclusions with different SiO2 content, were in good agreement with the simulated results.
