Design Method for Intermediate Roll in Multi-Stage Profile Ring Rolling Process: The Case for Excavator Idler Rim

作者：Lee Kyung Hun; Ko Dae Cheol; Kim Dong Hwan; Lee Seon Bong; Sung Nag Mun; Kim Byung Min^*

来源：International Journal of Precision Engineering and Manufacturing, 2014, 15(3): 503-512.

DOI：10.1007/s12541-014-0364-3

• Multi-stage profile ring rolling
• Roll design
• Uniform volume distribution element technique
• Extremum rolling ratio
• Excavator idler rim

In this paper; the design method for intermediate rolls has been developed to manufacture excavator idler rims in multi-stage profile ring rolling process, based on the uniform volume distribution element technique (UVDET) and the extremum rolling ratio(lambda(max)). UVDET is presented as the ratio of the volume change of ring blanks to that of undeformed rings per unit height. lambda(max) is defined as the ratio of the cross-sectional area of blanks to that of rolled rings. The theoretical value of intermediate roll shapes were determined by UVDET and lambda(max), Le. the outer diameter and cross-sectional shape of the intermediate ring, respectively. FE simulations and profile ring rolling experiments using AISI 1035 steel alloys were performed to prove the validity, of proposed design method In order to investigate the deformation behavior in profile ring rolling of excavator idler rims, the expanding rule of plastic zone should be carried out firstly. The proposed roll design method led to the successful ring shape and the highest dimensional precision.

• 出版日期2014-3