A manifold design problem for a plate-fin microdevice to maximize the flow uniformity of system

作者：Huang Cheng Hung^*; Wang Chun Hsien; Kim Sin

来源：International Journal of Heat and Mass Transfer, 2016, 95: 22-34.

DOI：10.1016/j.ijheatmasstransfer.2015.11.072

An optimum design problem to determine the optimum shapes for three-dimensional manifolds of plate-fin microdevice for the best system uniformity of flow ratios is examined in this study. The Levenberg-Marquardt Method (LMM) and a general purpose commercial code CFD-ACE+ are utilized to minimize both the system non-uniformity and manifold areas of the microdevice. Two third-order-polynomial functions are used to simulate the boundary shapes for inlet and outlet manifolds, and four different optimization design problems are examined to demonstrate the validity of the present study. The results obtained from the LMM are justified based on numerical experiments, and when applying two third order-polynomial functions to construct the shapes of manifolds, the designed plate-fin microdevice always has better system uniformity than the design with linear lines in constructing the shapes of manifolds since a 12.08% improvement for the system non-uniformity in the present design, Type OPT4, can be achieved when comparing with the previous optimal design, Type B-O609.

• 出版日期2016-4