Aqueous phosphate removal using nanoscale zero-valent iron

作者：Almeelbi Talal; Bezbaruah Achintya^*

来源：Journal of Nanoparticle Research, 2012, 14(7): 900.

DOI：10.1007/s11051-012-0900-y

• Phosphate
• Nanoscale zero-valent iron (NZVI)
• Microscale zero-valent iron (MZVI)
• Phosphate removal
• Phosphate recovery
• Adsorption
• Eutrophication
• Environmental remediation
• Sustainable development

Nanoscale zero-valent iron (NZVI) particles have been used for the remediation of a wide variety of contaminants. NZVI particles have high reactivity because of high reactive surface area. In this study, NZVI slurry was successfully used for phosphate removal and recovery. Batch studies conducted using different concentrations of phosphate (1, 5, and 10 mg PO43--P/L with 400 mg NZVI/L) removed similar to 96 to 100% phosphate in 30 min. Efficacy of the NZVI in phosphate removal was found to 13.9 times higher than micro-ZVI (MZVI) particles with same NZVI and MZVI surface area concentrations used in batch reactors. Ionic strength, sulfate, nitrate, and humic substances present in the water affected in phosphate removal by NZVI but they may not have any practical significance in phosphate removal in the field. Phosphate recovery batch study indicated that better recovery is achieved at higher pH and it decreased with lowering of the pH of the aqueous solution. Maximum phosphate recovery of similar to 78% was achieved in 30 min at pH 12. The successful rapid removal of phosphate by NZVI from aqueous solution is expected to have great ramification for cleaning up nutrient rich waters.

• 出版日期2012-7