Numerical investigation of energy and Reynolds stress distribution for a turbulent flow in an orifice

作者：Rani H P^*; Divya T; Sahaya R R; Kain V; Barua D K

来源：Engineering Failure Analysis, 2013, 34: 451-463.

DOI：10.1016/j.engfailanal.2013.08.010

• Turbulence
• Kinetic energy
• Dissipation rate
• Reynolds stresses
• Orifice

The turbulent heavy water and light water flows through an orifice, which characterize different reactor systems in nuclear power plants, are studied. The aim was to reveal the influence of process fluid on the turbulence parameters by considering heavy water and light water flows under the unique flow accelerated corrosion (FAC) conditions. The heavy water and light water are referenced based on their density values. The change in density values may have an effect on the flow dynamics and hence on FAC. These effects are brought out in this study and they can be extended to other cases for example, the change in the density of light water due to the chemical additions for controlling the pH values. The flow details at the downstream of orifice were studied extensively with the aid of computational modelling for different Reynolds numbers. Also structural development of the entire vortical flow field which could immensely enhance the knowledge about vortical structures occurring in the recirculation regions at the upstream and downstream of orifice is investigated. This study has been started with the exploration of flow topology of the velocity field by checking the topological consistency. The kinetic energy and dissipation rate were predicted by the modelling of turbulence using the Realizable k-epsilon model. Also the Reynolds stresses were calculated using the Reynolds stress model. The recirculation region showed maximum value for these parameters near the center line of the elliptic point, but for the dissipation rate this maximum value is observed at the wall. The maximum values of kinetic energy and wall shear stress are observed at the periphery of the orifice in comparison with that of the recirculation region. The predicted turbulent parameters have higher values in the recirculation region for heavy water flow and at the periphery of the orifice for light water flow with respect to each other flows. Also, the Sh distribution has been analyzed to estimate the FAC rate along the solid surface. The predicted peak values of these parameters will help to locate the locations which are susceptible to FAC.

• 出版日期2013-12