Nitrogen mass transfer models for plasma-based low-energy ion implantation

作者：Zheng, Bocong; Wang, Kesheng; Zhang, Zhipeng; Che, Honglong; Lei, Mingkai^*

来源：Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films , 2015, 33(2): 021311.

DOI：10.1116/1.4907713

• AUSTENITIC STAINLESS-STEEL
• CROSS-SECTIONS
• PHASE-FORMATION
• DIFFUSION
• DENSITY
• EXCITATION
• PROFILES
• DYNAMICS
• NEUTRALS
• FIELD

The nitrogen mass transfer process in plasma-based low-energy ion implantation (PBLEII) is theoretically and experimentally studied in order to explore the process mechanism of PBLEII and therefore to optimize the apparatus design and the process conditions. An electron cyclotron resonance (ECR) microwave discharge generates the nitrogen plasma with a high density of 10(11)-10(12) ions/cm(3), which diffuses downstream to the process chamber along the divergent magnetic field. The nitrogen ions in the plasma implant into the surface and transport to the matrix of an austenitic stainless steel under the low negative pulsed bias of -2 kV at a process temperature of 400 degrees C. A global plasma model is used to simulate the ECR microwave plasma discharge for a range of working pressures and microwave powers. The fluid models are adopted to calculate the plasma downstream diffusion, the sheath expansion and the low-energy ion implantation on the surface. A nonlinear kinetic discrete model is established to describe the nitrogen transport in the austenitic stainless steel and the results are compared with the experimental measurements. Under an average implantation current density of 0.3-0.6 mA/cm(2), the surface nitrogen concentration in the range from 18.5 to 29 at.% is a critical factor for the nitrogen transport in the AISI 304 austenitic stainless steel by PBLEII, which accelerates the implanted nitrogen diffusion inward up to 6-12 mu m during a nitriding time of 4 h.

• 出版日期2015-3
• 单位大连理工大学