Development and testing of the ACT-1 experimental facility for hypersonic combustion research

作者：Baccarella D^*; Liu Q; Passaro A; Lee T; Do H

来源：Measurement Science and Technology, 2016, 27(4): 045902.

DOI：10.1088/0957-0233/27/4/045902

• hypersonics
• combustion
• scramjet
• ACT-1

A new pulsed-arc-heated hypersonic wind tunnel facility, designated as ACT-1 (Arc-heated Combustion Test-rig 1), has been developed and built at the University of Notre Dame in collaboration with the University of Illinois at Urbana-Champaign and Alta S.p.A. The aim of the design is to provide a suitable test platform for experimental studies on supersonic and hypersonic turbulent combustion phenomena. ACT-1 is composed of a high temperature gas-generator system and a model scramjet combustor that is installed in an open-type vacuum test section of the wind tunnel facility. The gas-generator is designed to produce high-enthalpy (stagnation temperature = 2000 K-3500 K) hypersonic flows for a run time up to 1 s. The supersonic combustor section is composed of a compression ramp (scramjet inlet), an internal flow channel of constant cross-section, a fuel jet nozzle, and a flame holder (wall cavity). The facility allows three-way optical accesses (top and sides) into the supersonic combustor to enable various advanced optical and laser diagnostics. In particular, planar laser Rayleigh scattering (PLRS), high-speed schlieren imaging and OH-planar laser induced fluorescence (OH-PLIF) have successfully been implemented to visualize the turbulent flows and flame structures at high speed flight conditions.

• 出版日期2016-4