科研之友
微信
新浪微博
Facebook
分享链接
摘要
Flexural toppling is one of the main failure modes of natural and manmade anti-dip layered rock slopes. Based on cantilever slab tensile theory, the failure mechanism of flexural toppling was analyzed. A toppling slope is divided into three parts: the stability, tensile and shear zones. By considering this failure mechanism, a new stability analysis method for slopes against flexural toppling failure is proposed using equilibrium theory. In addition, a sensitivity analysis is performed to investigate the locations of possible failure surfaces and zones as well as changes in the stability of anti-dip rock slopes under different conditions. The results show that the positions of the inter-column forces have almost no effect on the stability factor but affect the areas of the tensile zone and the shear zone. The angle of the most dangerous potential failure surface increases with increasing dip angle and slope height, whereas the stability factor is negatively correlated with the dip angle and slope height but is positively correlated with the layer thickness. The failure mode is essentially flexural toppling when the layer thickness is small, but the failure mode gradually transitions to shear-sliding with increasing layer thickness. Finally, a real case study is analyzed using this method, and the calculated results are consistent with the actual conditions.
- 出版日期2018-6
- 单位中国地质大学（北京）
