科研之友
微信
新浪微博
Facebook
分享链接
摘要
A balance of applied hydrodynamic (T-H) and resisting adhesive (TA) torques was conducted over a chemically heterogeneous porous medium that contained random roughness of height h(r) to determine the fraction of the solid surface area that contributes to colloid immobilization (S-f*) under unfavorable attachment conditions. This model considers resistance due to deformation and the horizontal component of the adhesive force (F-AT), spatial variations in the pore scale velocity distribution, and the influence of h(r) on lever arms for T-H and T-A. Values of S-f* were calculated for a wide range of physicochemical properties to gain insight into mechanisms and factors influencing colloid immobilization. Colloid attachment processes were demonstrated to depend on solution ionic strength (IS), the colloid radius (r(c)), the Young%26apos;s modulus (K), the amount of chemical heterogeneity (P+), and the Darcy velocity (q). Colloid immobilization was also demonstrated to occur on a rough surface in the absence of attachment In this case, S-f* depended on IS, r(c), the roughness fraction (f(0)), h(r), and q. Roughness tended to enhance T-A and diminish T-H. Consequently, the effect of IS on S-f* was enhanced by hr relative to attachment In contrast, the effects of r(c) and q on S-f* were diminished by h(r) in comparison to attachment. Colloid immobilization adjacent to macroscopic roughness locations shares many similarities to grain-grain contact points and may be viewed as a type of straining process. In general, attachment was more important for higher IS and variance in the secondary minimum, and for smaller r(c), q, and K, but diffusion decreased these values. Conversely, straining was dominant for the opposite conditions. Discrepancies in the literature on mechanisms of colloid retention are likely due to a lack of consideration of all of these factors.
- 出版日期2013-6-11
- 单位CSIRO
