Particle trackers based on 1 mm and 0.7 mm scintillating fibers readout by a multi-anode photomultiplier

作者：Leverington Blake^*; Rosellini Rossano; Anelli Mario; Campana Pierluigi

来源：Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment , 2013, 718: 509-512.

DOI：10.1016/j.nima.2012.12.051

• Scintillating fibers
• Charged particle tracker
• Multi-anode photomultiplier
• Experimental Systems without Accelerators

A prototype particle tracking detector was constructed at LNF with 1 mm and 0.7 mm plastic scintillating fibers with a 64 channel Hamamatsu H7546A-200 Ultra-bialkali flat-panel multi-anode photomultiplier readout. Cosmic ray tracks from an array of 11 gas-filled drift tubes were matched to signals in the scintillating fibers in order to measure the resolution and efficiency of tracks reconstructed in the fiber-based tracker. The fibers allow for two possible readout methods, a hit-based (digital) and an amplitude-based (analog) mode. A GEANT4 detector simulation was also developed to compare cosmic ray data with Monte Carlo results. These fiber tracker designs are suggested as a way to meet the resolution and efficiency goals of modern detectors, such as an upgraded LHCb Outer Tracker. Resolutions for the fiber trackers were found to be 0.236 mm and 0.175 mm for the 1 mm and 0.7 mm trackers, respectively, in analog mode.

• 出版日期2013-8-1