A novel approach to determine the in-plane thermal conductivity of gas diffusion layers in proton exchange membrane fuel cells

作者：Sadeghi E^*; Djilali N; Bahrami M

来源：Journal of Power Sources, 2011, 196(7): 3565-3571.

DOI：10.1016/j.jpowsour.2010.11.151

• Conduction heat transfer
• In-plane thermal conductivity
• Fibrous porous media
• Anisotropic micro-structure
• Polytetrafluoroethylene coating

Heat transfer through the gas diffusion layer (GDL) is a key process in the design and operation of a proton exchange membrane (PEM) fuel cell. The analysis of this process requires determination of the effective thermal conductivity. This transport property differs significantly in the through-plane and in-plane directions due to the anisotropic micro-structure of the GDL
A novel test bed that allows separation of in-plane effective thermal conductivity and thermal contact resistance in GDLs is described in this paper. Measurements are performed using Toray carbon paper TGP-H-120 samples with varying polytetrafluoroethylene (PTFE) content at a mean temperature of 65-70 degrees C. The measurements are complemented by a compact analytical model that achieves good agreement with experimental data. The in-plane effective thermal conductivity is found to remain approximately constant, k approximate to 17.5 W m(-1) K-1, over a wide range of PTFE content, and its value is about 12 times higher than that for through-plane conductivity.

• 出版日期2011-4-1