科研之友
微信
新浪微博
Facebook
分享链接
摘要
Recently, we have introduced a novel, material-independent processing method for producing macro porous ceramics with capillary suspensions as a stable precursor. A capillary suspension is a three-phase system where a small amount of an immiscible secondary liquid is added to a suspension resulting in the formation of a sample spanning particle network. This technology provides open porosities well above 50% and pore sizes ranging from 0.5-100m. Here we focus on microstructure formation in the capillary suspensions and its impact on mechanical strength of the corresponding sintered parts. Based on the rheological data and SEM-images, three regimes (I, II, III) are identified with distinctly different flow properties of the wet suspension and characteristic structural features of the sintered ceramic parts depending on the amount of added secondary liquid phase. The average pore size increases and the pore size distribution changes from monomodal (I) to bimodal (II) and broad multimodal (III) with increasing amount of secondary liquid phase. A clear correlation between the yield stress of the wet suspension and the porosity and pore size is observed for regime (I) and (II). Compressive and flexural strength as well as the Young%26apos;s modulus monotonically decrease with increasing amount of the secondary liquid phase. Absolute values are mainly determined by the porosity and are well predicted by the Gibson %26 Ashby model for samples corresponding to regime (I) and (II). The broad pore size distribution in regime (III) results in a significantly lower mechanical strength.
- 出版日期2014-12
