A planar micro thermoelectric generator with high thermal resistance

作者：Yuan Zheng; Ziouche Katir; Bougrioua Zahia; Lejeune Pascale^*; Lasri Tuami; Leclercq Didier

来源：Sensors and Actuators A: Physical , 2015, 221: 67-76.

DOI：10.1016/j.sna.2014.10.026

• Micro thermoelectric generator
• Thermal resistance
• Efficiency factor
• Polysilicon
• Figure of merit
• Micromachining

This paper presents the modelling, design, fabrication and characterization of a planar micro thermoelectric generator (mu TEG) which is able to convert waste heat into a few microwatts of electrical power. In order to get a better performance under a large variety of heat sources even if their thermal resistance is high, a planar mu TEG with a large thermal resistance was designed and fabricated. It is built of two periodically etched silicon substrates that are respectively used as heat concentrator and heat evacuator, the whole embedding a multilayer membrane which includes a polysilicon-based thermopile with large thermoelement leg length. The thick air cavities etched in the substrates are effective in preventing the direct heat loss from concentrator to evacuator. 3D thermal simulations are carried out to improve the performance of the mu TEG. A new definition of the "efficiency-factor" which involves the thermal input power instead of the temperature difference across the chip is suggested to evaluate the efficiency of this kind of mu TEGs. The advantage of this new efficiency factor is that it takes the thermal resistance of the mu TEG into consideration. With a thermal resistance of 78 K/W, the experimental results show that the mu TEG can work under high temperature difference (up to 267 K). With an optimized structure, i.e. 5 membranes and annealed polySi as TE main material, the maximum output power of our mu TEG is 138 mu W/cm(2) when the input power is 4 W/cm(2) and its corresponding new efficiency factor is 865 mu m(2)/W.

• 出版日期2015-1-1