Non-linear Dynamics of Inlet Film Thickness during Unsteady Rolling Process

作者：Fu Kuo; Zang Yong^*; Gao Zhiying; Qin Qin; Wu Diping

来源：Chinese Journal of Mechanical Engineering (english Edition), 2016, 29(3): 522-530.

DOI：10.3901/CJME.2016.0118.010

• cold rolling
• lubricant film
• inlet zone
• surface topography
• unsteady
• non-linear

The inlet film thickness directly affects film and stress distribution of rolling interfaces. Unsteady factors, such as unsteady back tension, may disturb the inlet film thickness. However, the current models of unsteady inlet film thickness lack unsteady disturbance factors and do not take surface topography into consideration. In this paper, based on the hydrodynamic analysis of inlet zone an unsteady rolling film model which concerns the direction of surface topography is built up. Considering the small fluctuation of inlet angle, absolute reduction, reduction ratio, inlet strip thickness and roll radius as the input variables and the fluctuation of inlet film thickness as the output variable, the non-linear relationship between the input and output is discussed. The discussion results show that there is 180 phase difference between the inlet film thickness and the input variables, such as the fluctuant absolute reduction, the fluctuant reduction ratio and non-uniform inlet strip thickness, but there is no phase difference between unsteady roll radius and the output. The inlet angle, the steady roll radius and the direction of surface topography have significant influence on the fluctuant amplitude of unsteady inlet film thickness. This study proposes an analysis method for unsteady inlet film thickness which takes surface topography and new disturbance factors into consideration.

• 出版日期2016-5
• 单位北京科技大学