Numerical simulation of the high strain-rate behavior of quenched and self-tempered reinforcing steel in tension

作者：Riganti Gianmario; Cadoni Ezio^*

来源：Materials & Design, 2014, 57: 156-167.

DOI：10.1016/j.matdes.2013.12.049

• Reinforcing steel bar
• Simulation
• High strain-rate
• Upper yield dynamic stress
• Time dependent plasticity
• Split Hopkinson Tension Bar

This paper presents the numerical analysis of the high strain-rate behavior of quenched and self-tempered reinforcing steel in tension. The investigation has been performed properly simulating the experimental facility (SHTB-Split Hopkinson Tension Bar), highlighting criticism in the simulation and interpretation of the experimental results. Finite element simulation has allowed a robust model validation of the B450C reinforcing steel. Parametrical finite element model has been used to rebuild the input and output signals of the SHTB. Physical influence of damping in input wave and modeling strategies have been discussed. The elastic and damping dispersion fonts have been introduced into the model to explain the real case variability in SHTB signals. Strain-rate dependent plasticity model has been used by LsDyna code features. Time dependent plasticity has been developed to explain upper and lower yield values of the material resulting into a loading rate sensitivity. Finally, the material model has been used to reconstruct a virtual test over a rebar of 32 mm diameter, as an example of general procedure to calculate the global material response.

• 出版日期2014-5