A comparison between CO2 capturing capacities of fly ash based composites of MEA/DMA and DEA/DMA

作者：Sarmah Mridusmita; Baruah Bimala P; Khare Puja^*

来源：Fuel Processing Technology, 2013, 106: 490-497.

DOI：10.1016/j.fuproc.2012.09.017

• CO2 captures
• Supported amine
• Fly ash
• Composites

Two classes of amine fly ash based composites (FAA(13) and FAA(23)) are prepared and evaluated as CO2 adsorbents. FAA(13) is prepared from primary and tertiary amines (MEA/DMA) while FAA(23) (DEA/DMA) is prepared from secondary and tertiary amines. Composites were characterized by elemental analyses such as Scanning electron microscope (SEM-EDX), UV-Visible, Fourier Transform Infra Red (FT-IR), carbon, hydrogen, nitrogen (CHN) and Thermo-gravimetric Analysis (TGA). A temperature-programmed degradation study shows a much higher stability in comparison with other known simple amine solvents. Carbamate-amine is formed by the reaction of fly ash-amine composite with CO2. Results showed the maximum adsorptions of CO2 of 6.89 and 5.99 mmol/g on FAA(13) and FAA(23) respectively. Kinetics of CO2 on the composites was described by the linear driving force (LDF) model. The diffusion coefficients and activation energies of CO2 in the composites ranged between 6.33 x 10(-12) +/- 7 x 10-(12) cm(2)/s and 0.377 +/- 0.184 kJ/mol respectively at atmospheric pressure and 306 K. The prepared composites are thermally stable. A comparison of material cost and adsorption capacity showed that they are cheap and efficient for CO2 capturing.

• 出版日期2013-2