A study of different modes of collapse in metallic hemispherical shells resting on flat platen and compressed with hemispherical nosed indenter

作者：Gupta P K^*; Gupta N K

来源：International Journal of Solids and Structures, 2014, 51(13): 2518-2528.

DOI：10.1016/j.ijsolstr.2014.03.023

• Hemispherical shells
• Rolling plastic hinge
• Modes of collapse
• Quasi-static testing
• Energy absorption
• Aluminium

The paper presents experimental and analytical studies on axial compression of aluminium spherical shells having Radius/wall thickness (R/t) ratios between 23 and 135. Quasi-static compressive load was applied centrally and with offset through a indenter having diameter of 22 mm. Testing was carried out on an INSTRON machine having 250 T capacity. Shells having different radius and wall thickness were tested, to classify their modes of collapse and their corresponding energy absorption mechanism. In experiments shells of lower R/t values were found to collapse due to formation of an inward dimple associated with a rolling plastic hinge in central as well as in offset loading. On the other hand, shells of higher R/t values were collapsed initially with formation of an axisymmetric inward dimple, but in later stage of compression showed buckling of non-symmetric shape consisting of integral number of lobes and stationary plastic hinges. The stationary hinges were formed between consecutive lobes. Experimental observations are used to propose an analytical model for prediction of load-compression and energy-compression curves. The results obtained from analytical model compared with the experimental results and found match fairly well.

• 出版日期2014-6-15