Anisotropic responses, constitutive modeling and the effects of strain-rate and temperature on the formability of an aluminum alloy

作者：Khan Akhtar S^*; Baig Muneer

来源：International Journal of Plasticity, 2011, 27(4): 522-538.

DOI：10.1016/j.ijplas.2010.08.001

• Strain-rate sensitivity
• Constitutive behavior
• Quasi-static and dynamic response
• Anisotropy
• Forming limit diagrams

Finite deformation anisotropic responses of AA5182-O, over a wide range of strain-rates (10(-4) to 10(0) s(-1)) and temperatures (293-473 K) are presented. The plastic anisotropy parameters were experimentally determined from tensile experiments using specimens from sheet material. Using the experimental results under plane stress conditions, the anisotropy coefficients for Barlat's yield YLD96) were calculated at different strain-rates and temperatures. The correlations obtained from YLD96 are in good agreement with the observed experimental results. The strain-rate sensitivity of AA5182-O alloy changed from negative at 293 K to positive at 473 K. Khan-Huang-Liang (KHL) constitutive model is shown to correlate the observed strain-rate and temperature dependent responses reasonably well. The material parameters were obtained from the experimental responses along the rolling direction (RD) of the sheet. Marciniak and Kuckzinsky (M-K) theory was used to obtain the theoretical strain and stress-based forming limit curves (FLCs) at different strain-rates and temperatures. The experimental result from the published literature is compared with the FLCs from the current study.

• 出版日期2011-4