The effect of hydrothermal treatment on column performance for monolithic silica capillary columns

作者：Hara Takeshi; Mascotto Simone; Weidmann Christoph; Smarsly Bernd M^*

来源：Journal of Chromatography A, 2011, 1218(23): 3624-3635.

DOI：10.1016/j.chroma.2011.04.008

• Monolithic silica column
• Hydrothermal treatment
• Inverse size exclusion chromatography
• Nitrogen physisorption
• Mass transfer
• Mesopores

Monolithic silica capillary columns with id. 100 mu m and monolithic silica rods were prepared with tetramethoxysilane (TMOS) or a mixture of TMOS and metyltrimethoxysilane (MTMS) using different hydrothermal treatments at T=80 degrees C or 120 degrees C. Nitrogen physisorption was applied for the pore characterization of the rods and inverse size exclusion chromatography (ISEC) for that of the capillary columns. Using nitrogen physisorption, it was shown change of pore size and surface area corresponds to that of hydrothermal treatment and silica precursor. The results from ISEC agreed well with those from nitrogen physisorption regarding the pore size distribution (PSD). In addition, the retention factors for hexylbenzene with the ODS-modified capillary columns in methanol/water = 80/20 at T = 30 degrees C could also support the results from nitrogen physisorption. Furthermore, column efficiency for the columns was evaluated with alkylbenzenes and three kinds of peptides, leucine-enkephalin, angiotensin II, and insulin. Column efficiency for alkylbenzenes was similar independently of the hydrothermal treatment at T = 120 degrees C. Even for TMOS columns, there was no significant difference in column efficiency for the peptides despite the difference in hydrothermal treatment. In contrast, for hybrid columns, it was possible to confirm the effect on hydrothermal treatment at T = 120 degrees C resulting in a different column efficiency, especially for insulin. This difference supports the results from both nitrogen physisorption and ISEC, showing the presence of more small pores of ca. 3-6 nm for a hybrid silica without hydrothermal treatment at T = 120 degrees C. Consequently, the results suggest that hydrothermal treatment for a hybrid column with higher temperature or longer time is necessary, compared to that for a TMOS column, to provide higher column efficiency with increase in molecular size of solute.

• 出版日期2011-6-10