A neural network based technique for vibration characterization using Gaussian laser beams

作者：Abbasi Naveed A; Landolsi Taha^*; Dhaouadi Rached

来源：Mechatronics, 2015, 25: 44-54.

DOI：10.1016/j.mechatronics.2014.11.007

• Vibration monitoring
• Neural networks
• Optical sensors
• Photodetector array
• Gaussian beam optics

This paper presents a neural network technique combined with an optical measurement system for the characterization of mechanical vibrations in industrial machinery. In the proposed system, the Gaussian beam of a laser source illuminates on an array of photodetectors. If either the laser source or the photodetector array is coupled with a vibrating system, then the optical powers detected by the photodetectors will vary accordingly, and are expected to reflect the magnitude and frequency of the X-Y planar vibrations of the monitored system. The time-varying optical powers are input to an artificial neural network-based vibration monitoring system which maps the power distributions to the X-Y position of the laser beam center. An experimental setup of the system is built and used for training and testing purposes. The obtained experimental results demonstrate the adequacy of combining optical techniques with neural networks to estimate the vibration frequency and magnitude. Estimated frequencies were within 1% of the actual ones, and the estimated magnitudes were within 29% of the actual magnitudes when using a chirp signal in the training phase. The magnitude estimation percentage error was further reduced below 12% when the neural network was trained with a decaying chirp signal.

• 出版日期2015-2