A highly sensitive and selective bulk optode based on dithiacyclooctadecane derivative incorporating chromoionophore V for determination of ultra trace amount of Hg(II)

作者：Firooz Ali R^*; Ensafi Ali A; Hajyani Z

来源：Sensors and Actuators B: Chemical , 2013, 177: 710-716.

DOI：10.1016/j.snb.2012.11.089

• Bulk optode
• Dithiacyclooctadecane derivative
• Mercury(II)
• Spectrophotometry

A new optical sensor for highly sensitive and selective determination of ultra-trace amounts of mercury(II) ions is developed. This optode is based on the interaction of 1,15-diaza-3,4,12,13-dibenzo-8-oxa-16,18-pyridin-5,1-dithiacyclo octadecane-2,14-dione with Hg(II) in plasticized (2-nitrophenyloctyl ether (o-NPOE)) polyvinyl chloride (PVC) membrane incorporating chromoionophore V as a lipophilic H+-selective indicator. By increasing Hg(II) concentration, the absorbance of chromoionophore V in the membrane decreased at 668 nm whereas the absorbance at 567 nm increased. With the proposed sensor at pH 6.3, mercury(II) can be measured in the range of 1.0 x 10(-12)-8.6 x 10(-4) mol L-1 with a limit of detection 5.3 x 10(-13) mol L-1. The relative standard deviation for eight determination of 1.0 x 10(-10) mol L-1 Hg(II) was 2.8%. The results obtained for the determination of mercury ions in water samples, SRM, and tomato leaves using the proposed optode were found to be comparable with the well-established cold vapor atomic absorption spectrometry.

• 出版日期2013-2