Amorphous red phosphorous embedded in carbon nanotubes scaffold as promising anode materials for lithium-ion batteries

作者：Yuan, Demao; Cheng, Jianli; Qu, Guoxing; Li, Xiaodong; Ni, Wei; Wang, Bin^*; Liu, Heng

来源：Journal of Power Sources, 2016, 301: 131-137.

DOI：10.1016/j.jpowsour.2015.10.003

• Conductive scaffold
• Amorphous red phosphorus
• Lithium ion battery
• Carbon nanotubes
• Ball-milling

Amorphous red phosphorus/carbon nanotubes (ARPC) composites are prepared by planetary ball-milling technique with the pre-milling red phosphorus processes, consisting of uniformly distributing amorphous red phosphorus embedding in a three-dimensional conductive scaffold of interconnected carbon nanotubes (CNTs). Combining the three-dimensional conductive network with the amorphous red phosphorus can not only alleviate the volumetric change in the charging/discharging processes, but also provide conductive network for electron transport and dramatically improve the specific capacity, cycling stability and rate capability of the composite electrode. The ARPC composites deliver a high initial charge capacity of 2133.4 mAh g(-1) at a current density of 0.05 C and maintain a reversible capacity of 998.5 mAh g(-1) with a high Coulombic efficiency of approximately 99% after 50 cycles. Meanwhile, the composite can maintain high specific capacities of 1993.8 mAh g(-1), 1896.9 mAh g(-1), 1546.8 mAh g(-1) and 816.6 mAh g(-1) at 0.01 C, 0.05 C, 0.1 C and 0.5 C, respectively. Compared with that of the ball-milled amorphous red phosphorus with or without CNTs, the pre-milled ARPC composites show much better electrochemical performances.

• 出版日期2016-1-1
• 单位中国工程物理研究院