科研之友
微信
新浪微博
Facebook
分享链接
摘要
The convertibility of paperboard in a press-forming process was studied using a novel type of tool set that allows forming of small substrates such as laboratory handsheets (i.e. experimental materials) to investigate the role of mold design on substrate-press-tool interaction. The tool set makes it possible to prepare rectangular trays in both sliding and fixed blank modes in a pilot-scale press-forming machine. The tests showed that the fixed-blank mode makes it possible to estimate the elongation of the substrate in the forming process by determining the maximum forming depth for rupture-free samples. A more detailed inspection with an optical microscope of grid-patterned materials revealed that elongation took place mostly on the rim area in addition to the tray wall, and that the outer dimensions of the blank remained practically unchanged. The behavior of the material in press forming process was evaluated in addition to the novel tool set in a bigger, production-scale mold, and results showed good agreement between the small tool set and the standard mold, in spite of the dimensional differences. The smaller size of the mold did not require a compromise in any aspect of the press-forming process.
- 出版日期2017
