Numerical modeling of FSW welding process incorporating a parameter estimation technique

作者：Pereyra S^*; Lombera G A; Urquiza S A

来源：Revista Internacional de Metodos Numericos Para Calculo y Diseno en Ingenieria, 2014, 30(3): 173-177.

DOI：10.1016/j.rimni.2013.04.007

• Estimation of parameters
• Inverse problem
• Friction stir welding

Numerical models of heat transfer and fluid flow used in the simulation of the friction-stir welding (FSW) process have contributed to the understanding of the process. However, there are some input model parameters that cannot be easily determined from fundamental principles or the welding conditions. As a result, the model predictions are not always in agreement with experimental results. In this work, the Levenberg-Marquardt (LM) method is used in order to perform a non-linear estimation of the unknown parameters present in the heat transfer and fluid flow models, by adjusting the temperatures results obtained with the models to temperature experimental measurements. These models are implemented in a general-purpose software that uses a numerical formulation developed from the finite element method (FEM). The unknown parameters are: the friction coefficient and the amount of adhesion of material to the surface of the tool, the heat transfer coefficient on the bottom surface and the amount of viscous dissipation converted into heat. The obtained results show an improvement in the numerical model predictions from the incorporation of parameter estimation techniques.

• 出版日期2014