Hydroxyethyl cellulose doped with copper(II) phthalocyanine-tetrasulfonic acid tetrasodium salt as an effective dual functional hole-blocking layer for polymer light-emitting diodes

作者：Wu Cheng Liang; Chen Yun^*

来源：Optical Materials, 2017, 69: 38-48.

DOI：10.1016/j.optmat.2017.04.004

• Polymer light-emitting diode
• Hole-blocking layer
• Hydroxyethyl cellulose
• Copper(II) phthalocyanine-tetrasulfonic acid tetrasodium salt

We report a doping method to improve the performance of solution-processed polymer light -emitting diodes (PLEDs). Doping 12 wt% copper(II) phthalocyanine-tetrasulfonated acid tetrasodium salt (TS-CuPc) into hydroxyethyl cellulose (HEC) as a dual functional hole-blocking layer (df-HBL) of multilayer PLED (glass/ITO/PEDOT:PSS/HY-PPV/TS-CuPc-doped HEC/LiF/Al) significantly enhanced maximum luminance, maximum current and power efficiency over that without the df-HBL (10,319 cd/m(2), 2.98 cd/A and 1.24 Im/W) to (29,205 cd/m(2), 13.27 cd/A and 9.56 Im/W). CV measurements reveal that HEC possesses a powerful hole-blocking capability. Topography and conductivity AFM images show that doping TS-CuPc increases the interfacial contact area and interfacial conductivity, which can overcome the insulating nature of HEC and thus further facilitate electron injection. Enhancements in device performance are attributed to the improved carrier balance and recombination in the presence of df-HBL, confirmed in electron-only and hole-only devices. Moreover, apparently raised open-circuit voltages provide further evidence that enhanced electron injection is indeed realized by the df-HBL. This study demonstrates an effective approach to develop highly efficient PLEDs.

• 出版日期2017-7