摘要

A third-order loop filter (LF) using a single op-amp resonator is presented for continuous-time delta-sigma modulators. The proposed technique improves both the power and area efficiencies by reducing the number of active components and simplifying the modulator topology. It also enhances the controllability of the transfer function and resonating condition of the single op-amp LF by using positive feedback. A more power-efficient implementation is obtained with an autonomous common-mode dynamic comparator. Fabricated in a 180-nm CMOS technology, the modulator occupies an active area of 0.14 mm(2) and consumes 37.4-mu W power from a 1.8-V supply. It achieves a dynamic range of 72.5 dB and a peak signal-to-noise and distortion ratio of 67.3 dB in a 150-kHz signal bandwidth when clocked at 12 MHz. The Walden figure-of-merit of the modulator is 65.9 fJ/conv.-step.

  • 出版日期2018-7