摘要

A method to continuously measure bed and water levels along a cross- shore transect of vertical poles is evaluated. This remote sensing based method uses video imagery of swash flows propagating past an array of vertical poles buried on the beach face. Using datasets collected at two beaches in Chile, the method is compared against measurements obtained with conventional co- localized instruments: LiDAR and ultrasonic distance meters. The present video swash pole technique shows good skill in retrieving swash zone bed level and water levels, while providing the possibility to measure morphological variations at time scales varying from wave groups ( tens of seconds) to hours. Discrepancies between video and ultrasonic distance meters are found when short time scales are used, for both depositional and erosion events, but longer duration trends are captured well. Water surface elevations at the wave- by- wave scale proved to be accurate for the backwash phase ( root- mean- sqaure- error, RMSE down to 0.028 m, R2 up to 0.89), when compared against LiDAR. However, discrepancies have been found during the uprush phase ( RMSE up to 0.062 m, R2 down to 0.71), when the influence of the pole on the swash flow generates an overestimation of the water surface. Overall, owing to its simplicity of deployment, low cost and reasonable accuracy, the technique is considered suitable for swash studies.

  • 出版日期2018-1