Non-linear analysis and calculation of the performance of a shelving protection system by FEM

作者：del Coz Diaz J J; Garcia Nieto P J; Vilan Vilan J A; Suarez Sierra J L

来源：Applied Mathematics and Computation, 2011, 218(6): 2365-2376.

DOI：10.1016/j.amc.2011.07.066

• Finite element modeling
• Shelving protection system
• Non-linear numerical simulation
• Impact analysis

The aim of this paper consists on the study, analysis and calculation of the efficiency of a shelving protection system by means of the finite element method (FEM). These shelving protection systems are intended to prevent the eventual damage due to the impacts of transport elements in motion, such as: forklifts, dumpers, hand pallet trucks, and so on. The impact loads may threaten the structural integrity of the shelving system. The present structural problem is highly non-linear, due to the simultaneous presence of the following nonlinearities: material non-linearity (plasticity in this case), geometrical non-linearity (large displacements) and contact-type boundary conditions (between the rigid body and the protection system). A total of 48 different FEM models are built varying the thickness of the steel plate (4, 5 and 6 mm), the impact height (0.1, 0.2, 0.3 and 0.4 m) and the impact direction (head-on collision and side impact). Once the models are solved, the stress distribution, the overall displacements and the absorbed impact energy were calculated. In order to determine the best shelving protection's candidate, some constraints must be taken into account: the maximum allowable stress (235 MPa), the maximum displacement (0.05 m) and the absorbed impact energy (400 J according to the European Standard Rule PREN-15512). Finally, the most important results are shown and conclusions of this study are exposed.

• 出版日期2011-11-15