科研之友
微信
新浪微博
Facebook
分享链接
摘要
The integration of microfluidic devices with micro X-ray fluorescence (micro-XRF) spectrometry offers a new approach for the direct characterization of liquid materials. A sample presentation method based on use of small volumes (<5 mu l) of liquid contained in an XRF-compatible device has been developed. In this feasibility study, a prototype chip was constructed, and its suitability for XRF analysis of liquids was evaluated, along with that of a commercially produced microfluidic device. Each of the chips had an analytical chamber which contained approximately 1 mu l of sample when the device was filled using a pipette. The performance of the chips was assessed using micro-XRF and high resolution monochromatic wavelength dispersive X-ray fluorescence, a method that provides highly selective and sensitive detection of actinides. The intended application of the device developed in this study is for measurement of Pu in spent nuclear fuel. Aqueous solutions and a synthetic spent fuel matrix were used to evaluate the devices. Sr, which has its K line energy close to the Pu L line at 14.2keV, was utilized as a surrogate for Pu because of reduced handling risks. Between and within chip repeatability were studied, along with linearity of response and accuracy. The limit of detection for Sr determination in the chip is estimated at 5ng/mu l (ppm). This work demonstrates the applicability of microfluidic sample preparation to liquid characterization by XRF, and provides a basis for further development of this approach for elemental analysis within a range of sample types.
- 出版日期2014-12
- 单位Los Alamos
