科研之友
微信
新浪微博
Facebook
分享链接
摘要
A high-stress tri-axial cell that can accommodate pore pressures was designed to simulate hydraulic fracturing processes in the laboratory. The cell can maintain its integrity and causes negligible deformations up to 100 MPa, providing sufficient precision for measuring rock properties and simulating hydraulic fracturing under reservoir conditions. Wedged spacers embedded with O-seals provide the pore pressure inside the cell. Special considerations are taken to avoid stress concentrations, including tapering the flat jacks to ensure uniform stresses on the sample. Acoustic sensors can be attached to the samples to detect acoustic emission signals. Simulations using the designed cell were performed and provided reasonable results.
- 出版日期2014-3
- 单位中国石油大学（北京）
