Numerical analysis for curved vortex tube optimization

作者：Bovand Masoud^*; Valipour Mohammad Sadegh; Eiamsa ard Smith; Tamayol Ali

来源：International Communications in Heat and Mass Transfer, 2014, 50: 98-107.

DOI：10.1016/j.icheatmasstransfer.2013.11.012

• Ranque-Hilsch vortex tube
• Swirl flow
• CFD
• Curvature
• Thermal separation

Vortex tubes hold promise for developing low cost refrigeration and air conditioning systems. They do not require the use of any moving parts. Moreover, they also do not consume energy when compressed air is available. In this study, a CFD is conducted to determine the effect of vortex tube curvature on their performance. A three dimensional CFD model that utilizes the RNG k-epsilon turbulence model is employed for the numerical simulations. The flow and temperature field in curved vortex tubes with curvature angles are simulated in the range of 0 degrees(straight) to 150 degrees. The tangential (swirl), axial velocity components and flow patterns including secondary circulation flow are evaluated. The numerical simulations are verified through comparison with experimental data reported in the literature. The results are then used for evaluating the coefficient of performance (COP) of the vortex tube as a cooling solution.

• 出版日期2014-1
• 单位MIT