科研之友
微信
新浪微博
Facebook
分享链接
摘要
For predicting high-temperature deformation behaviour in Aermet100 steel, the experimental stress-strain data from isothermal hot compression tests on a Gleeble-3800 thermo-mechanical simulator, in a wide range of temperatures (1073-1473 K) and strain rates (0.01-50s(-1)). were employed to develop the Arrhenius-type constitutive model and artificial neural network (ANN) model, and their predictability for high-temperature deformation behaviour of Aermet100 steel was further evaluated. The predictability of two models was quantified in terms of correlation coefficient (R) and average absolute relative error (AARE). The R and AARE for the Arrhenius-type constitutive model were found to be 0.9861 and 7.62% respectively, while the R and AARE for the feed-forward back-propagation ANN model are 0.9995 and 2.58% respectively. The breakdown of the Arrhenius-type constitutive model at the instability regimes (i.e. at 1073 K and 1173K in 0.1, 1, 10 and 50 s(-1), and at 1373 K in 50s(-1)) is possibly due to that physical mechanisms in the instability regimes, where microstructure exhibits cracking, shear bands and twin kink bands, are far different from that of the stability regimes where dynamic recovery and recrystallization occur. But the feed-forward back-propagation ANN model can accurately track the experimental data across the whole hot working domain, which indicates it has good capacity to model the complex high-temperature deformation behaviour of materials associated with various interconnecting metallurgical phenomena like work hardening, dynamic recovery, dynamic recrystallization, flow instability, etc.
- 出版日期2011-5-24
- 单位中国航发北京航空材料研究院; 河南理工大学; 西北工业大学
