科研之友
微信
新浪微博
Facebook
分享链接
摘要
It is quite possible to detect the strain of a sample based on a chirped fiber grating (CFG) sensor, which has a wider bandwidth of light signal than a fiber Bragg grating. Usually, environmental factors play negative roles in the process of intensity demodulation. A drift-eliminating method of CFG intensity demodulation has been created and tested in our lab. Three CFG sensors were involved in this research. Two of them with close wavelength bands connected in series were used as a strain sensing unit; the third one was used as a referencing grating working within the reflective wavelength spectrum of the other two. It is shown that the signal ratio of the sensing unit and the referencing grating is a linear function of the loading strain. The linearity is as high as 99.79%.
- 出版日期2014-5-1
- 单位武汉理工大学
