科研之友
微信
新浪微博
Facebook
分享链接
摘要
Polished finishing granites are greatly accepted for claddings because of the plates' shape, design and color variety. The features depend on the geological conditions that occur during the formation process, which include the mineralogy of the stone, the fluids formed during the process, the grain size of the minerals and the way in which the minerals interact with each other. One of the noblest uses of stone plates is in non-adherent covering systems (without mortar), such as ventilated fa double dagger ades and pedestrian paving systems. Currently, the methodology for non-adherent systems uses the allowable stress design criteria. In recent years, the number of papers indicating reliability analysis as an important design tool for natural stones has increased. However, a lack of information concerning the design methodology still happens. Therefore, the structural properties assessed as complementing these studies were: compressive strength, three-point flexural tensile strength, Young's modulus and Poisson's ratio. A granite slab design example was also presented. First, the thickness of the plates was determined based on the formulation proposed by Timoshenko [Strength of materials (original language, Portuguese), Volume II. Editora Ao Livro T,cnico S. A., Rio de Janeiro, 1977], using the allowable stress design criteria. Next, the reliability analysis was performed by Monte Carlo simulation. Results showed that the Desire, White granitic plate presented a higher reliability index than the Capo Bonito Red granitic plate. This result seems to be paradoxical, owing that the Capo Bonito Red presented a higher value of mean flexural strength than the Desire, White. The minimal safety factors to satisfy the target reliability value of 3.8 as recommended by the standard EN 1990:2002 (Eurocode) were found to be 2.61, 1.98 and 2.72, respectively, for the three stone types.
- 出版日期2014-11
