Generation and size classification of single-walled carbon nanotube aerosol using atmospheric pressure pulsed laser ablation (AP-PLA)

作者：Klanwan Jira****; Seto Takafumi^*; Furukawa Takuma; Otani Yoshio; Charinpanitkul Tawatchai; Kohno Masamichi; Hirasawa Makoto

来源：Journal of Nanoparticle Research, 2010, 12(8): 2747-2755.

DOI：10.1007/s11051-010-9847-z

• Carbon nanotube
• Aerosol
• Differential mobility analyzer
• Laser ablation
• Synthesis method

Gas suspended single-walled carbon nanotubes (SWCNTs) with single tube diameter smaller than 2 nm and length of longer than 500 nm were generated by simple and continuous system using laser ablation technique under atmospheric conditions. Graphite target containing 0.5 wt%-nickel and 0.5 wt%-cobalt was ablated by Nd:YAG laser in an electrical furnace under atmospheric pressure of nitrogen flow that allowed one step and continuous synthesis of the SWCNTs. Size distribution of the gas suspended SWCNTs aerosol was measured using size-classification by a differential mobility analyzer (DMA) coupled with a condensation particle counter (CPC) used as a detector. Characteristics of SWCNT aerosol generated under the different temperature were also investigated using scanning and transmission electron microscopes and Raman scattering. Mono-mobility SWCNT aerosol with mobility diameter of 100 and 200 nm was successfully prepared after the size separation using a DMA.

• 出版日期2010-10