Medium density fibreboard production by hot pressing without adhesive using Triarrhena sacchariflora residue bio-pretreated by white-rot fungus Coriolus versicolor

作者：Wu, J. G.^*; Zhang, X.; Liu, J.; Xiong, M.; Lu, X. Y.; Fan, H. D.; Wang, X. F.; Zhang, X. Y.

来源：Journal of Applied Microbiology, 2016, 121(2): 415-421.

DOI：10.1111/jam.13148

• fermentation
• fibreboard
• fungi
• optimization
• waste

Aims: To produce fibreboard with Triarrhena sacchariflora residue (TSR) without adhesive and understand the relationship between bio-pretreatment and mechanical property of fibreboard. @@@ Methods and Results: White-rot fungus Coriolus versicolor was used to pretreat TSR, and biochemical and physical analysis were investigated by ultraviolet spectrophotometry, Fourier transform infrared spectroscopy and environmental scanning electron microscopy method. @@@ Conclusions: TSR was suitable to produce fibreboard without adhesive by bio-pretreatment with C. versicolor. The property of fibreboard became stronger by optimization of bio-pretreatment parameters, and the moduli of rupture and elasticity of fibreboard were increased to 18.12 MPa and 4.3 GPa, respectively, which were close to national standard of medium-density fibreboard with adhesive. Bio-pretreated TSR increased the mechanical properties of fibreboard because of 1.4-fold content of polysaccharide and 1.15 U g(-1) laccase, more hydroxyl group and more porous surface structure than that of untreated TSR. @@@ Significance and Impact of the Study: TSR-based fibreboard production without adhesive eliminated potential formaldehyde gas emission.

• 出版日期2016-8
• 单位淮阴师范学院; 华中科技大学