科研之友
微信
新浪微博
Facebook
分享链接
摘要
Three types of composite coatings were deposited by high velocity oxy-fuel (HVOF) spraying using metal-clad WC-18Co and SiC-50Co cermet powders, and sintered-crushed Al2O3-75Ni composite powders. Liquid-solid two-phase state of the sprayed particles with two different structures was achieved prior to their impingement on the substrate. The effects of particle structure and HVOF spraying parameters on volume fraction of the solid phase were investigated. The distribution of ceramic particle size inside coatings was also clarified. Scanning electron microscopy was employed to characterize the microstructure of HVOF sprayed cermet coatings. The volume fraction of solid particles and the distribution of particle size in the three types of coatings were estimated using a quantitatively metallographic approach from the microstructure of the coatings. The volume fraction of the solid phase in the coating made from Al2O3-Ni powders was increased with increase in the fuel gas flow. The maximum volume fraction of the Al2O3 phases reached about 64% of the original powder. On the other hand, the volume fraction of solid phase in the clad cermet coatings was decreased with increasing the fuel gas flow. The volume fraction of the solid phase dropped significantly from 72.2% in the original WC-18Co particle to 8.5% in the coating. The limited retention of the solid phase from spray particle to subsequent coating is due to rebounding off of large solid particle upon impacting.
- 出版日期2006-7
- 单位西安交通大学
