摘要

A procedure is presented for the derivation of an effective small-strain soil stiffness governing the soil structure interaction of large-diameter monopiles. As a first step, geophysical measurements are used to estimate the depth-dependent shear modulus G of the soil stratum. The second step is to use this modulus and an estimated Poisson's ratio and density in a 3D model, which captures the deformation of both the monopile and the soil. As a final step, a new method is proposed to use the computed 3D response for identification of a depth dependent stiffness of an effective Winkler foundation. This stiffness can be used in a 1D model, which is more fit for design purposes. The presented procedure is deemed more appropriate than the often used "p-y curve" method, which was once calibrated for slender flexible piles and for which the input is based on the large-strain cone penetration test. The three steps are demonstrated for a particular design location. It is also shown that the displacements of the 3D model are smaller and the resulting fundamental natural frequency is higher than calculated with the p-y method.

  • 出版日期2016-10-1