摘要

Nowadays, turbocharged internal combustion engines (ICEs) are very common in automotive powerplants, monopolizing the diesel sector and having a steadily increasing percentage in the gasoline one. In this frame, the interest in modeling the behavior of the turbomachinery components involved, with the ultimate goal of characterizing the performance of the turbocharged ICE, seems clear. A turbomachine can be simulated using three-dimensional computational fluid dynamics software, but its computational cost does not allow one to reproduce the whole turbocharger test rig. Moreover, the existence of long ducts requires a considerable computational time until the pressure reflections at the boundaries dissipate in order to reach a periodic solution. %26lt;br%26gt;The use of non-reflecting boundary conditions reduces the length of ducts needed without introducing spurious wave reflections. An anechoic boundary condition (BC) based on the method of characteristics (MoC) has been previously developed, considering the case of an inviscid and adiabatic one-dimensional flow of a perfect gas. However, real flows do not behave in such an ideal manner. In this paper, the extension of the scope of the previous BC is sought. In this way, a methodology to evaluate the performance of the anechoic BC under these real flow situations is shown. The consideration of an ideal gas instead of perfect gas, the flow viscosity, and the non-homentropic flow make it necessary to modify the method of characteristics, since the Riemann invariants are not constant any more. In this frame they are referred to as Riemann variables. An additional issue that has been considered is the effect of swirl flow, such as the one in the turbine outlet, on the anechoic BC. Some improvements to be implemented in the BC are proposed in order to have a better performance in these real flow situations.

  • 出版日期2013-4