Adaptive parametric interpolation scheme with limited acceleration and jerk values for NC machining

作者：Xu, Rong Zhen; Xie, Le^*; Li, Cong Xin; Du, Dao Shan

来源：International Journal of Advanced Manufacturing Technology, 2008, 36(3-4): 343-354.

DOI：10.1007/s00170-006-0834-6

• acceleration
• chord error
• jerk
• look-ahead
• NURBS
• parametric interpolator

Parametric interpolation has many advantages over the traditional linear or circular interpolation in computer numerical control (CNC) machining. The existing work in this regard is reported to have achieved constant feedrate, confined chord error and limited acceleration/deceleration in one interpolator. However, the excessive jerk still exists due to abrupt change in acceleration profile, which will cause shock to the machine as well as deteriorate the surface accuracy. In this paper, an adaptive interpolation scheme incorporating machine's dynamics capability consideration is proposed and illustrated in details. In the proposed algorithm, the commanded feedrate is maintained at most of the time and adaptively reduced in large curvature areas to meet the demand of the machining accuracy requirement, while at the same time, the acceleration and jerk values are limited within the machine's capabilities during the whole interpolation process. It ensures a high machining accuracy, eliminates the phenomenon of overshoot/undershoot and reduces mechanical shock to the machine tools. The real-time performance of this interpolator is also measured to demonstrate its practical application. Two non-uniform rational B-spline (NURBS) curve interpolation experiments are provided to verify the feasibility and advantages of the proposed scheme.

• 出版日期2008-3
• 单位上海交通大学