科研之友
微信
新浪微博
Facebook
分享链接
摘要
A two-phase thermofluidic oscillator was recently reported as being capable of undergoing sustained operation when a constant and low temperature difference is applied to the device, which consists of a network of tubes, compartments and two heat exchanger blocks. Within this arrangement a working fluid undergoes thermodynamic property oscillations that describe a heat engine cycle. Previous attempts to model the dynamic behaviour of this thermofluidic engine for performance predictions have been based on linear analyses. These have provided us with useful knowledge of the necessary minimum temperature difference for operation, and the resulting oscillation frequency and efficiency. However, experimental observations suggest a limit cycle operation associated exclusively with nonlinear systems. The present paper presents an effort to devise a nonlinear model for the device. Indicative results from this model are discussed, and the predictions are compared to those from the linear equivalents and experimental observations. The results reveal that although both linear and nonlinear models predict similar oscillation frequencies, the nonlinear model predicts lower exergetic efficiencies. This probably arises from the inability of the linear representation in the thermal domain to capture the saturation in the rate of heat exchange between the working fluid and the heat exchangers. The present effort aims to provide a better understanding of this device and to suggest improved design guidelines for increased efficiency and power density.
- 出版日期2013-4
