Wilkinson Power Divider With Complex Isolation Component and Its Miniaturization

作者：Wang Xiaolong^*; Sakagami Iwata; Mase Atsushi; Ichimura Makoto

来源：IEEE Transactions on Microwave Theory and Techniques, 2014, 62(3): 422-430.

DOI：10.1109/TMTT.2014.2300835

• Compensating capacitor
• complex isolation component
• coupled line
• parallel and series RLC
• Wilkinson power divider (WPD)

By adding a complex isolation component between two 90 transmission lines at an arbitrary phase angle from the input terminal, a small Wilkinson power divider provides physical separation and electrical isolation between two output ports. General design equations for the complex isolation component are derived from even-and odd-mode analysis. Parallel and series RLC circuits are chosen to realize complex isolation components, respectively. Considering the bandwidths of S-22, S-33 and S-32, inductors in both parallel and series RLC components are omitted to get the widest bandwidths; mathematical proof and design examples are also presented in this paper. A coupled line section with a compensating capacitor is introduced to reduce the circuit size, where characteristic impedances between even and odd mode are different in the coupled line section, and their electrical lengths are also different in inhomogeneous medium. Mathematical equations and simulation examples prove that the compensating capacitor compensates the characteristic impedance difference in the homogeneous medium and the electrical length difference in the inhomogeneous medium. Finally, an experimental circuit shows good agreement with the theoretical simulation.

• 出版日期2014-3