Mass spectrometry for the determination of fission products Cs-135, Cs-137 and Sr-90: A review of methodology and applications

作者：Bu Wenting; Zheng Jian; Liu Xuemei; Long Kaiming; Hu Sheng; Uchida Shigeo

来源：Spectrochimica Acta Part B: Atomic Spectroscopy , 2016, 119: 65-75.

DOI：10.1016/j.sab.2016.03.008

• Mass spectrometry
• Cs-135/Cs-137 isotopic ratio
• Sr-90
• Chemical separation
• Interference eliminating
• Environmental monitoring

The radioactive fission products (CS)-C-135, (CS)-C-137 and Sr-90 have been released into the environment by human activities such as nuclear weapon tests, nuclear fuel reprocessing and nuclear power plant accidents. Monitoring of these radionuclides is important for dose assessment. Moreover, the Cs-135/Cs-137 isotopic ratio can be used as an important long-term fingerprint for radioactive source identification as it varies with weapon, reactor and fuel types. In recent years, mass spectrometry has become a powerful method for the determination of Cs-135, Cs-137 and Sr-90 in environmental samples. Mass spectrometry is characterized by the high sensitivity and low detection limit and the relatively shorter sample preparation and analysis times compared with radiometric methods. However, the mass spectrometric determination of radiocesium and Sr-90 is affected by the peak tailings of the stable nuclides Cs-133 and Sr-88, respectively, and the related isobaric and polyatomic interferences. Chemical separation and optimization of the mass spectrometry instrumental setup are strongly needed prior to the mass spectrometry detection. In this paper, we have reviewed the published works about the determination of Cs-135, Cs-137 and Sr-90 by mass spectrometry. The mass spectrometric techniques we cover are resonance ionization mass spectrometry (RIMS), thermal ionization mass spectrometry (TIMS), accelerator mass spectrometry (AMS) and inductively coupled plasma mass spectrometry (ICP-MS). For each technique, the principles or strategies used for the analysis of these radionuclides are discussed; these included the abundance sensitivity, ways to suppress the interference signals, and the instrumental setup. In particular, the chemical procedures for eliminating the interferences are also summarized. To date, triple quadrupole ICP-MS (ICP-QQQ) showed great ability for the analysis of these radionuclides and the detection limits were as low as 0.01 pg/mL levels. Finally, some investigations on the behaviors of radiocesium and radioactive source identifications are presented with the results of Cs-135/Cs-137 isotopic ratios measured in various environmental samples.

• 出版日期2016-5-1
• 单位中国工程物理研究院