Dimentional welding control using vibratory stress relief

作者：Casanova Garcia Fernando; Henao Saldarriaga Duvan; Franco Arenas Fernando

来源：Revista Ingenieria e Investigacion, 2008, 28(1): 22-25.

• residual stress
• vibratory stress relief
• deformation
• arc welding

The effectiveness of applying vibratory stress relief to controlling deformations due to internal stresses on plates produced by welding was evaluated in this research. The magnitude of distortion produced in three groups of specimens which had been treated with vibration during and after welding was also evaluated. The specimens consisted of austenitic stainless steel plates which tend to become deformed due to high expansion and shrinkage coefficient and low thermal conductivity during arc welding. Their deformation was quantified by measuring the vertical distance which the end of the plate moved after the welding bead was applied. The magnitude of stress produced by the effect of vibration was measured too. The results revealed a clear reduction of the final deformation in treated specimens compared to non-treated ones. It was also found that the magnitude of stress produced during vibration had no important effect on the treatment's effectiveness.

• 出版日期2008-4