Development and experimental analysis of piezoelectric optical scanner with implemented periodical microstructure

作者：Janusas G^*; Palevicius A; Ostasevicius V; Bansevicius R; Busilas A

来源：Journal of Vibroengineering, 2007, 9(3): 10-14.

• piezoelectric optical scanner
• holography
• periodical microstructure

Piezoelectric optical scanner is developed for multi-coordinate control of optical laser beam by excitation of microstructures. The manufactured microstructure is the periodical structure which was implemented in piezoelectric optical scanner design. Such type of opto-micro-mechanical systems can be used for accurate angular or linear deflection of optical elements in various optomechanical and optoelectronic systems. The operating principle of these devices is based on piezoelectric effect and on conversion of high-frequency multi-dimensional mechanical oscillations of piezoelectric vibration transducers into directional multi-coordinate motion of the optical elements in the measurement chain. The main distinctive feature of such optical piezoelectric scanners is the combination of high micrometer range resolution with a wide range of angular deflections of the scanning, elements. The manufacturing process and visualization of the microstructure were presented. The device consists of piezoelectric cylinder and a scanning element with three degrees of freedom. The control model of this device was derived using simulation results of optical scanner by COMSOL Multiphysics software. ESPI digital holographic PRISMA system was used to validate the result of simulation of piezoelectric optical scanner and to test the functionality of piezoelectric optical scanner with implemented microstructures.

• 出版日期2007-9