Design, manufacturing, and flight testing of a fixed wing micro air vehicle with Zimmerman planform

作者：Hass****ian M; Abdelkefi A^*

来源：Meccanica, 2017, 52(6): 1265-1282.

DOI：10.1007/s11012-016-0475-2

• Fixed wing MAV
• Zimmerman planform
• XFLR5
• Aerodynamic analysis
• Stability
• Fabrication
• Flight test

An optimized and comprehensive method is used to design and manufacture a fixed wing micro air vehicle (MAV) with Zimmerman planform. The design process includes four stages which are the specification of the flight mission, determination of the best aspect ratio, identification of the optimum wing loading and thrust loading values, and estimation of the weight of the structural components of the MAV. To do this, various statistical and analytical methods are utilized. Based on an aerodynamic analysis, the results show that an optimum aspect ratio that maximizes the performance of the Zimmerman MAV for a well-defined cruise speed is determined. Considering six possible flights, a constraint analysis is performed and an optimum wing loading value is determined. It is shown that the computational method is beneficial to determine the exact masses for the structural components including the wing, fuselage, and vertical tail. Using the 3D panel method, the determination of the shape of the reflexed airfoil for the MAV is successfully done by minimizing the drag force and the angle of attack to use less powerful motor and avoid any stall effect, respectively. A stability analysis is then performed to check the safe flight of the designed vehicle. During test flight, the results show that the designed Zimmerman MAV satisfies the pre-defined specification. The final characteristics of the manufactured MAV are: wingspan of 44 cm, weight of 450 g, aspect ratio of 1.51, cruise speed of 20 m/s, and flight endurance of 20 min.

• 出版日期2017-4